Mold Temperature Controller

◆整机CAD设计，外形美观坚固。
◆整机控制电器全部采有用国内外名厂正宗产品，选用进口名牌小体积高压泵，并配有多重安全保护装置，确保机器长期高效安全运转。
◆温度控制精度高，数字式显示，操作简便。
◆能迅速达到所须的工作温度，并始终保持恒温，减少预热时间。
◆能促使模具保持适当的温度，大幅减少试模次数，降低成型品不良率。
◆根据需要，可选择安置以水（自动加水系统）或热媒油为传热介质。
◆采用不锈钢板F304制成水（油）箱，耐腐蚀，不漏水（油），寿命长。

◆To improve injection molding efficiency:
a. Automatically controls mold's temperature requirement to give perfect moldings with every shot.
b. Keeps mold at correct temperature even when machine is stopped thus eliminating start up delays in the morning or during daytime stops.
c. As mold temperature is kept at its optimum temperature the injection machine can be run at its maximum speed to suit the job.
◆To improve injection molding quality:
a. Steady controlled temperatures make your plastic moldings accurate in size & consistent in quality.
b. Accurate mold temperatures give even plastic flow patterns, reduce flow & weld lines, help retain gloss appearance, eliminate sink marks, silver streaking, delaminating, warping etc…
◆Features of the units:
a. Water/oil dual purpose machine can use either water or oil heating medium.
b. Special compact construction means both heating & cooling of the medium being used is done within the unit.
c. WH temperature controllers are used for accurate control of temperature within
±1℃
d. The stainless steel tank (F304) guards. Against corrosion is safe from rust & leaks.
e. Safety device containing an audible alarm will break the circuit automatically when the pump is overloaded, temperature overheats or there is a shortage of oil or water.